Different types of feeders manufactured by this company, with engineering design, have the capability of continuous feeding and initial separation to the stone crushing line, which are manufactured with various designs, including:
Griizzli Screen, River Feeder, High Volume Horizontal Feeder, Roller Screen, Vibrating Screen, Crank and Mountain
Feeder grizzly
It has end combs to separate fine grains from coarse ones
Adjustable shoulders
Preventing excessive crushing of the crusher
Construction in single and double axis mode
The axles are made of strong steel alloys
Strong structure and springing
Anti-wear liners
River feeder
Can be used for small or so-called river materials
It has an output load adjustment valve
Equipped with an electronic system to control the vibration range
It has an initial load storage silo with the possibility of increasing it
Can be used to feed secondary stone crushers as storage and depot
Crank feeder
Can be used in materials with moisture
The possibility of changing the round trip range
Rollers with hard alloy to withstand high pressures
Horizontal feeder with high capacity
Use in high capacities
It has a double bearing and is very strong
The entire inner surface has double anti-wear liners
Wobbler mineral feeder (WOBBLER FEEDER)
It consists of an area of separate triangular shaped barolicks that move the load forward as these triangular or polyhedron shaped rolls rotate.
Excellent, especially in cases where raw materials are wet and have small, hard-to-separate particles.
The act of separating sticky materials and feeding the crusher at the same time
Can be used after the feeding feeder and before the stone crusher
Increasing the quality of the final output load without washing
Pre-screening and cleaning of dirty materials with clay content
Better material movement due to multi-faceted and muscle-shaped roll design
